| Automatic flame cutter (6" thickness), eight (8) cutting torches and multiple heat pantograph. |
Crimp-type plate roll (1/2" x 8' x 12")
Plate roll (_" x 10' x 18")
Heavy Plate (1 1/4" x 8' x 22") |
Welding Equipment:
a. 15 AC, 50 DC with current range 200-1500 amps
b. 8 manual, 10 power welding positioner
c. 28 manual, 20 automatic turning rolls
d. 5 Lincoln manipulators ML2 automatic welding machines
e. 5 Holbert automatic tube welders
f. 4 Linde Heli-arc inert gas welders
g. 2 National Cylinder Min-arc
h. Power cutting
i. Sigma
j. 2 Automatic nozzle welders |
Machine Tools:
(2) Radial drills, 77" reach, 18" column, 3" maximum drill size
(1) Radial drill, 96" reach, 18" column, 3" maximum drill size
(1) Radial drill, 144" reach, 30" column, 4 1/2" maximum drill size |
| Heat Treating:
a. Heat treat oven, 10'w x 10'h x 10"L with automatic controls and recorder
b. Heat treat oven, 20'W x 20' H x 60'L with automatic controls and recorder.
c. Heat treating for larger equipment by local outside firm in the Houston area |
Onsite 20'x20'x60' heat treating furnace. |
|
| Radiographic Inspection Performed by local outside firm in Houston area utilizing mobile equipment, as required. |
| Normal maximum hydrostatic test pressure - 10,000 psig, 2,500 psig pneumatic, including recording pressure meters (Higher pressures available as special) |
Non-destructive testing available as required, i.e., halide, magnaflux, dye penetrant, mass spectrometer.
Miscellaneous equipment:
bending machine and all dies for 3/4" and 1" tubes (U-type), tubesheet cladding,
16" flex wheel Dewalt saw. |
| Hilles & Jones plate shear, 7/8" x 10' |
| 500-ton crimping press |
| Babin automatic hole driller |
| Padding Haus iron works |
| Plasma arc (1) PAC-45: (1) PAC-10 |
| Post hydrotest air dryer aids in removing water prior to nitrogen purge/shipping. |
 |
|
| NC Gun Drill 44" capacity |
| 15' x 15' Manipulator w/Tandem Arc. |
| 23 Spindle Computer Controlled Drill
15 Spindle Computer Controlled Drill
3 Spindle Computer Controlled Gun Drill |
 |
|
|
|
|
| Materials and Thickness |
Max |
Min |
| Carbon Steel |
7" |
3/16" |
| Nickel |
3" |
1/8" |
| Nickel Clad |
3" |
— |
| Nickel Alloy |
3" |
— |
| Stainless Steel |
— |
3/16" |
| Cow Chromium Steels |
3/16" |
1/8" |
| Nonferrous |
— |
— |
| Copper |
1" |
1/8" |
| Everdur |
1" |
1/8" |
| Aluminum |
1" |
1/8" |
| Monel |
1 1/2" |
1/8" |
| Hastelloy |
1" |
1/8" |
| Aluminum Bronze |
1 1/2" |
1/8" |
| Incoloy |
3" |
1/8" |
|
|
|
